Protection class
IP45
Operating voltage
12 V DC
Power consumption
7.2 W
Power consumption standby
1 W
Flow pressure
50-1000 kPa
Maximum cold water temperature
25 °C
Flush volume Factory setting for cistern (l)
6 and 3 l
Large flush volume Setting range for cistern
4 / 4.5 / 6 / 7.5 l
Small flush volume Setting range for cistern
2-4 l
Calculated flow rate
0.11 l/s
Minimum flow pressure for calculation flow
50 kPa
Flushing capacity per solenoid valve
4 l/min
Interval flushing Factory setting
72 h
Interval flushing time Factory setting
180 s
Maximum flush volume per day and solenoid valve
40 l
Minimum flush interval
24 h
For installation in Geberit GIS support systems for pre-walls, partition walls or free-standing walls
Suitable for barrier-free construction
For wall-hung WCs with connection dimensions according to DIN EN 33:2011-11
For wall-mounted WCs with extended projection up to 70 cm
For 1-flush, 2-flush or flush-stop flushes
For floor constructions 0-20 cm
To prevent stagnation in drinking water pipes
Galvanised frame
Frame with four quick fasteners
In the Geberit GIS supporting structure, infinitely height-adjustable
Frame prepared for supports for WC ceramics with small contact surface
Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm
Fastening of connection bend sound-insulated
Concealed cisterns with front actuation
Flush-mounted cistern with condensation water insulation
Immediate flushing possible with factory setting
Building protection for service opening protects against moisture and dirt
Construction protection for service opening can be cut to length
With empty pipe for water supply line for connection of Geberit AquaClean shower toilets
Mounting option for electrical connection
Flush programmes selectable (time or interval)
Compatible with Geberit SetApp
Operation and initial commissioning with Geberit SetApp
Protocols can be read out with Geberit SetApp
Potential-free fault indication via digital I/O
Built-in backflow sensor
Solenoid valve normally closed
One connection for cold water R 1/2", MF-capable, with blue protective cap, on top
Building protection for service opening
Connection set for WC, ø 90 mm
Connection bend 90° made of PE-HD, ø 90 mm
4 protective and marking plugs
2 threaded rods M12
Transition sleeve made of PE-HD, ø 90 / 110 mm
Solenoid valve unit with safety pin and flow limiter
Power supply unit 230 V / 12 V / 50 Hz with output cable length 5 m
Control unit
Fixing material